Li-Ion batteryLight, compact, longer duration, no memory effect.
Samsung SDI battery Samsung batteries for power bank has achieved world’s longest battery life cycle. They minimize capacity loss that may occur during long-term usage and thereby maximizes the user’s convenience.
Keyless chuckEnables fast manual changing of accessories without any special key.
Variable torqueTorque regulator enables adjustment of contact pressure and torque force.
V-grooveAllows chamfering at the edges of treated workpieces.
2 function modes (drilling / impact drilling)Enables changing between 2 operation modes: drilling (in wood, metal, plastic) and impact drilling (in concrete, bricks, masonry).
2 function modes (screwdriving / drilling)Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).
3 function modes (drilling / impact drilling / chiselling)Enables changing between 3 operation modes: drilling (in wood, metal, plastic), impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
4-stage pendulumEnables the changing of pendular motion between 4 stages.
Angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Anti-vibrations systemAllows to reduce the fatigue during extended period of work.
Planing depth regulatorConstantly adjustable and suitable as additional handle for safer positioning.
Cutting depth adjustmentAllows half-cuts in order to obtain clean cuts and sharp edges during a second try.
Dust extraction systemAllows to collect dust in designated dust bag or to connect vacuum cleaner.
Electronic speed adjustmentSpeed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.
Extra gear rim chuck with SDS PLUS adapterAllows the use of drill bits with cilindric shank in rotary hammers with SDS PLUS chuck.
Gear rim chuckEnsures safe fastening of accessories.
Integrated LED lightLocated on the housing, it offers the user an always well lit workspace.
Keyless chuck with locking functionEnables fast manual changing of accessories without any special key. Equipped with locking function ensures reliable fixation of accessories.
Lock-off functionFix OFF position of on/off switch to prevent an accidental switching on of the power tool.
Lock-on functionFix ON position of on/off switch to ensure comfort during extended work mode.
M10 spindle threadSuitable for accessories featuring M10 mounting bore.
M14 spindle threadSuitable for accessories featuring M14 mounting bore.
Metal keyless chuckEnables fast manual changing of accessories without special key.
Reverse functionIt allows to change rotational direction.
Quick chargerAllows full battery charging in only 1 hour time.
Safety clutchProtects the power tool against overload and damage in case of accessories sticking during drilling.
Safety stop Avoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.
SDS-Plus chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Soft gripLocated on the handle, it offers additional comfort for the users.
Soft startProvides a slow and even start-up without overloading the power grid.
Spindle automatic lockingDrill spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.
Spindle lockBlocks the spindle in its rotating movement so that the circular saw blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the accessories may be inserted or removed easily.
Step speed selectionAllows to select the range of revolutions per minute for specific types of work.
Vario-lock modeAllows to arrange the chisel in a comfortable position for specific chiseling works.
Variable speedAllows to select optimal speed for specific materials.
Two-position on / off switchSecured both in "on" position and in "off" position.
Restart protectionPrevents the power tool from automatically starting up after a power cut.
Saw blade easy changeEnables fast manual changing of saw blade without any special key.
Resharpenable bladesUse the specific device provided in order to resharpen blades when blunted.
Interchangeable bladesBlades sharpened on both sides; this design does not allow re-sharpening.
Impact drilling functionFor impact drilling in hard materials ( such as concrete, bricks, masonry).
Screwdriving modeFor screwing / unscrewing threaded fasteners (such as bolts, nuts, screws, self-tapping screws).
1/2" square tool holderSuitable for accessories provided with appropriate mounting hole (1/2" square). Enables quick accessories changes.
1/4" hexagonal tool holderSuitable for accessories provided with appropriate shank (1/4" hexagonal). Enables quick accessories changes.
2 function modes (blower / vacuum cleaner)Allows to convert the blower into a vacuum cleaner in order to collect debris.
2 function modes (impact drilling / chiselling)Enables changing between 2 operation modes: impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
2-step regulatorAllows to change the settings of work-temperature and air flow.
2 function modes (stirring / drilling)Enables changing between 2 operation modes: stirring (miхing different building materials) or drilling (in wood, metal, plastic).
3-step regulatorAllows to change the settings of work-temperature and air flow.
3 function modes (screwdriving / drilling / impact drilling)Enables changing between 3 operation modes: screwdriving (screwing / unscrewing threaded fasteners), drilling (in wood, metal, plastic) or impact drilling (in concrete, bricks, masonry).
3 V-grooves Allows chamfering at the edges of treated workpieces.
30L capacityThe vacuum cleaner container provides 30 liter capacity.
60L capacityThe vacuum cleaner container provides 60 liter capacity.
80L capacityThe vacuum cleaner container provides 80 liter capacity.
100L capacityThe vacuum cleaner container provides 100 liter capacity.
Adjustable nozzleAllows to choose between 3 different spray jet shapes.
Adjustable spark protectorProtects user from sparks and metal filings during the grinding process. It may be adjusted to the most suitable angle for work.
Adjustable work piece supportAllows safe placement of workpiece on the grinding disc, that permits to maintain the desired sharpening angle.
Air flow adjustmentAllows to adjust optimal air flow for specific works.
Anti-vibrations handleAllows to reduce the fatigue during extended period of work.
Automatic circuit breaker Prevents unintentional switching on in case of current supply interruption. It increases safety of the operation.
Both-sided table extensionsAllows to cut bigger workpieces.
Carriage positionAllows to lower and lock the carrying grip for easy transportation and space-saving storage.
Clamping deviceAllows to secure the workpiece during operation.
Sanding paper clamping systemFeatures clamp lever for easy and convenient replacement of sanding papers.
Rotation speed stabilization systemMaintains the preset revolutions per minute both at an idle speed and under load. This allows a smooth advance of the power tool during operation.
Cool stageCold air mode allows to cool off workpieces and surfaces after heat treatment.
Rear D-handleAllows safe handling.
DC motorMechanically commutated electric motor powered by direct current.
Wet / dry cuttingAllows dry cutting and wet cutting thanks to the integrated water cooling system.
Wet/dry functionAllows water absorption, oil absorption, acid suction and dust absorption.
Dry cuttingCutting without water cooling system.
Dust blowing from the cutting lineAllows to re-direct the sawdust air flow.
Full blade safety guardSecures cutting disc from along diameter.
Hanging systemAllows to hang power tool during the utilization.
HEX-13 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-17 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-28 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-30 tool holderSuitable for accessories provided with corresponding shank which allows fast manual fastening.
Impact rate regulationMakes it possible to set up optimal quantity of impact for the respective materials.
Impact strength regulationAllows to select optimal strength of impact for specific materials.
Kerf laser indicatorShows the cutting line.
LED-screenShows the selected number of revolutions.
LED-screenShows the selected temperature.
Lock-off / Lock-on functionFix OFF position of on/off switch to prevent an accidental switching or fix ON position of on/off switch to ensure comfort during extended work mode.
M10 tool holder threadSuitable for accessories featuring M10 shank.
M14 tool holder threadSuitable for accessories featuring M14 shank.
M22 spindle threadSuitable for accessories featuring M22 mounting bore.
M22 tool holder threadSuitable for accessories featuring M22 shank.
Choosing the chips ejection directionAllows to install reflector for chips ejection in two opposite directions.
Plunge depth control systemAllows the user to select the desired milling depth.
Mitre angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Ni-Cd batteryProvides good performance at low temperatures.
Overload protectionAutomatically switches off the power tool in case of overheating.
Power light indicatorOn when the power tool is connected to the mains and ready to be switched on.
Rotating rear handleRear handle can be rotated into different positions.
Rotation stabilizerMaintains set rotation rate irrespective of applying pressure on the surface during polishing.
Tool holder Allows to install accessories with appropriate shank.
Scale of milling depthShows the selected depth of milling.
SDS-Max chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
SDS-Plus square chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Sliding working tableIntended to supply workpieces when performing cross and angular cutting.
Spindle lockBlocks the spindle in its rotating movement so that the grinding accessories may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the diamond cutting blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the router bits may be inserted or removed easily.
Stroke rate regulationAllows to adjust optimal stroke rate for specific materials.
Speed adjustmentAllows to change revolutions per minute.
Table for stationary useAllows the use of power tool in stationary mode.
Temperature protectionAutomatically switches off the power tool in case of overheating.
Temperature settingAllows to adjust optimal temperature for specific types of work.
Variable paint flowAllows to set the intensity of the paint application ensuring perfect coverage.
Variable speedAllows to select optimal belt speed for specific types of work.
Velcro and clamping fixing systemAllows the use of abrasives with both type of fixing system: clamping or velcro.
Velcro fixing systemAllows quick, easy and safe fixation of abrasives.
Water resistant on/off switchSwitch is protected against water splashing.
Wet cuttingAllowed thanks to the integrated water cooling system.
Wet grindingAllows thanks to the integrated water cooling system.
Wet operationAllowed thanks to the integrated water cooling system.
Carbon brush replacement indicator lightWarns regarding the need to replace carbon brushes.
Fuel tank capacityThe maximum capacity of fuel tank is 0,55 L.
Fuel tank capacityThe maximum capacity of fuel tank is 0,6 L.
Fuel tank capacityThe maximum capacity of fuel tank is 1,1 L.
3/8" square tool holderSuitable for accessories provided with appropriate mounting hole (3/8" square). Enables quick accessories changes.
3/4" square tool holderSuitable for accessories provided with appropriate mounting hole (3/4" square). Enables quick accessories changes.
1" square tool holderSuitable for accessories provided with appropriate mounting hole (1" square). Enables quick accessories changes.
2 lines projection modeAllows to project one horizontal line and / or one vertical line.
3 lines projection modeAllows to project one horizontal line and / or two vertical lines.
5 lines projection modeAllows to project one horizontal line and / or four vertical lines.
Laser class 2The laser beam meets the safety requirements of the class 2
Automatic self-levellingThe tool is equipped with a self-levelling system
High class OSRAM DiodeOSRAM is the market leader for the production of laser diodes. Its name is a guarantee of advanced technologies and superior quality
Belt clipThe tool is provided with hook for easy carrying.
LCD displayDisplays the object and values of measurements made.
Reference pointAllows choosing the reference point.
Possibility of steady-state useThe power tool design allows steady-state operation.
Type of measureAllows choosing the type of measurements.
CalculatingAllows carrying out mathematical operations awith measured values.
Units selectionAllows choosing units of measurement
MemoryAllows saving measurements made.
Battery locking systemLocking bracket provides secure attachment battery, and prevents it disconnection even by work with strong vibrations.
Brushless motorBrushless motor without carbon brush for smooth and efficient work and maintenance-free.
Built-in levelDesigned for correct positioning of the appliance.
LCD screenDisplays values of measurements made.
BacklightAllows enabling the backlight.
Operation modeAllows choosing the mode of operation
Arc forceThe arc force function allows the sticking of the electrode to a piece to be welded to be prevented.
Easy startThe easy start function (increased voltage of idle running) facilitates the lighting up of the welding arc.
Voltage reduction device VRDThe function of voltage reduction of idle running increases the safety of the welding works performance.
Input power Allow use one or three phase input power.
Multi-process machinesThe welding machine can perform both TIG or MMA process
TIG welding technologyGas tungsten arc welding / Tungsten inert gas welding.
Welding torch operating mode 2T / 4T2T mode is recommended for short -term welding. 4T mode is recommended for continued welding.
Inductance regulationIt allows to adjust the arc softness and stiffness. For deep weld penetration, the arc is made stiffer; however, spattering is increased in this case. The soft arc is used to weld root welds and to lift vertical welds.
Voltage meterIt shows the selected voltage.
Voltage regulationIt allows you to set the voltage value.
External wire feeder External welding wire feeding unit.
CUT technologyPlasma cutting.
Welding current meter Shows the selected welding current.
Internal wire feederWelding machine has Internal welding wire feeding.
Gradual decrease of welding current Using special regulator time of welding current decrease can be set. Gradual decrease of welding current allows high-quality crater filling in the end of welded seam.
High-frequency arc startingWelding arc is started without contact between tungsten electrode and welding surface using a flash generated by high-frequency device.
MOSFET technologyMetal-oxide-semiconductor field-effect transistor.
Multi-process machines.The welding machine can perform both MIG or MMA process
Air coolingThe ventilation system protects internal components from overheating and increases efficiency
Hot start function The hot start function increases the set welding current for a short time at the moment of the welding arc lighting. It facilitates the lighting up of the welding arc.
Current controlAllows the intensity of the current to be changed, depending on the thickness of the metal being cut.
3-PhasesThree phase input power.
1-PhaseSingle phase input power.
IGBT technologyInsulated-gate bipolar transistor.
MMA welding technology Shielded metal arc welding / Manual metal arc welding.
Pressure protectionThe system prevent the pressure overload.
Detergent tankThe machine is provided with separate tank for the use of cleaning products
Hose reel Allows you to safely and compactly store a high-pressure hose.
Adjusting detergent quantityAllows setting the quantity of detergent added to the water.
Self primingThe automatic system allows to start the tool quickly even after long inactivity.
Variable pressureAllows to select optimal pressure for specific uses.
Adjustable streamEnables fast manual adjustment of water stream.
Easy fill Allows filling the reservoir without dismount it.
Safety cleaningPrevent electric shock when cleaning the power tools.
Built-in stationAllows you to safely store, transport the sprayer.
Metal tankMade of robust stainless steel, reliable and easy to clean.
Suction power 2-step adjustmentThe suction power can be set in two positions to achieve the best efficiency in all the situations
Suction power 3-step adjustmentThe suction power can be set in three positions to achieve the best efficiency in all the situations
Triple outlet air cleaning systemThe system allows for effective removal of fine dust (plaster, soot, etc.).
Air blowing modeThis function allows for cleaning by blowing off waste with airflow in places where it is complicated or impossible to suck in waste (air purging of complex office machines, blowing leaves off gravel path, etc.).
Suction power adjustmentThis function may be useful when cleaning dirt from light movable objects (carpets, floor mats, etc.).
Possibility to connect other power toolsWhen in this mode, the vacuum cleaner switches on automatically if the connected power tool is switched on.
HEPA-filter cleaningAllows clean the HEPA filter without removing it from the vacuum cleaner.
Precise rotationAllows accurately set the position of the tool's body when measuring.
Protection class IP54 Protection against splashes falling in any direction.
Magnification x32Allows magnify the image of the object.
Manometer The tool is provided with manometer for a precise regulation of the pressure.
Quick-change attachmentsEnlarge the area of power tool usage and allow to perform works in hard-to-reach places.
Spindle automatic locking Tool spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.
Outdoor modeAllows to make measurements in conditions of strong illumination.
Unlevelled signalIt signals the impossibility of automatic alignment of the laser head.
Laser head lockingAllows to lock the laser head in a stationary position.
Integrated tripodThe tripod is included in the delivery set.
Precise rotationAllows you to position the vertical beam with high accuracy.
Aluminium frameThe structure of the tool is made by light and strong aluminium material
Safety lockFixes the body of the power tool in the upper position and locks the on / off switch, protecting against accidental switching on.
RebatingIt allows planing a rabbet in the workpiece.
Level sensorShows tilt angle of the body of the power tool.
Spirit levelShows the position of the power tool case in the horizontal plane.
Ergonomic handleIt facilitates curved cuts.
Gas purgeImproves quality of welded seam.
Quick couplingAir inlet 1/4".
Quick couplingAir inlet 1/2".
Quick couplingAir inlet 3/8".
Transition sleeveAdapter sleeves for rivets of three different diameters.
Types of rivetsAllows the use of rivets made of aluminum, copper and stainless steel.
Auto suctionAllows you to hold the rivet in any position.
Hanging systemAllows you to hang the tool.
Rotating pivotIt prevents air hose from tangling.
Easy detachAllows you to quickly connect / disconnect the tool to the air line.
Two in oneAllows to use both staples and nails.
Change of air discharge directionThe air exhaust can be rotated in your favourite direction, for a more confortable work
Units selectionAllows choosing units of measurement.
Square baseWide square base with wheels
Universal 360° wheelsIncrease mobility and facilitate appliance movement.
Oil-water separatorIt cleans the intake air from oil and water.
Oil tank capacityThe maximum capacity of oil tank is 0,26 L.
Oregon saw chainOregon is synonymous of quality and strenghtness.
Auto lubricationThe system allows the chain to be lubricated automatically during the work.
Easy startThe pull resistance is reduced up to 30%.
Brake systemEfficient protection chain brake system for safe and quick chain stop.
Primer pumpThe pump allows to start the tool quickly even after long inactivity.
Fuel tank capacityThe maximum capacity of fuel tank is 0,9 L.
Multi combi headThanks to the use of a wide range of interchangeable cutting tools you will be able to mow grass, weeds, bushes and prune trees and hedges.
12 VSuitable for 12 V devices
14.4 VSuitable for 14.4 V devices
16 V Max.Suitable for 16 V Max devices
18 VSuitable for 18 V devices.
20 V Max.Suitable for 20 V Max. devices.
Metal base plateThe power tool has a solid base plate, cast from aluminum and having steel inserts
Break rundownStops the spindle of the power tool within 2 seconds after the power tool is turned off
Quick adjustable protective casingAllows to change the position of the protective casing without using any tools
High-torque indicatorShow when operation with high-torque is activated and need to reduce the feed of the power tool
Overheating and overload protection systemTurns off the motor of the power tool when it overheats, and also if it consumes an excessively high current
Aluminium base plateThe power tool has a solid base plate, cast from aluminum
Spindle lockBlocks the spindle in its rotating movement so that the accessories may be inserted or removed easily
28 speed stagesThe power tool is equipped with an electronic speed control system that allows to select the range of revolutions per minute for specific types of work
Flexible shaftAllows to transmit torque at arbitrary angles
Special accessories connectionAllows to install accessories in the most convenient position for work
Swivel head of worklightCan be rotated relative to body
Green laserTool has a green laser emitter
Red laserTool has a red laser emitter
Silent operationThanks to its construction, the generator is featured by a low level of noise
ATS Auto transfer switchThe automatic transfer switch allows to switch on the generator as a backup source in order to provide temporary electrical power if the utility source fails
AC 400V socketThe generator is equipped with 400V 3-phase current output
AC 230V socketThe generator is equipped with 230V 1-phase current output
DC 12V outputThe generator is equipped with 12V DC current output
Electric startThe motor engine is equipped with electric start, for comfortable and fast operation
Fuel tank capacity: 14,5 lThe big tank capacity allows the generator to work for long periods without refuelling
Synchronous alternatorThe syncronous alternator allows an high efficiency in power generation process
Voltage meterThe voltage meter allows precise control of the output power
Engine protectionThe generating set is equipped with low oil warning system．This system will stops the engine automatically when the oil level falls below the lower level. This prevents accidents and damages to the generator
2x AC 230V socketThe generator is equipped with 2 sockets with 230V 1-phase current output
Manual startAllows to start the generator engine manually, without using a battery.
Low wear out convert systemEnsure longer life time.
Welding machine functionThe device can be also used as welding machine.
Smart buttonDesigned to turn on / off the appliance and has an auto-leveling indicator of laser head.
Swivel headIt allows to work at different angles.
Additional shaftIt allows to extend the tool, for work at bigger height.
Leg protection It protects feet from injury while working.
Flux core wireIt is possible to use the welding machine in NO GAS mode, with flux core wire.
2 step/4 step welding modesWelding cycle can be controlled by the switch in 2 step or 4 step mode.
2 step/4 step cutting modesCutting cycle can be controlled by the switch in 2 step or 4 step mode.
Analog voltage meterShows the working voltage.
Fuel tank capacity: 12,5 lThe big tank capacity allows the generator to work for long periods without refuelling
Operating modes with preset parametersYou can save 4 user operating modes (temperature + air flow).
Oil tank capcityThe maximum capacity of oil tank is 0,6 L.
SHARP DiodeSHARP is one of the market leaders for the production of laser diodes. Its name is a guarantee of advanced technologies and superior quality.
Anti-stick functionWhen the electrode sticks to the material to be welded,the device automatically turns off the welding generator, protecting the electrode from overheating and shedding of the coating and allowing its manual removal.
Spindle thread 1-1/4"Allows to install diamond core bits with diameter of seat thread 1-1/4".
Residual current devices (RCD)Interrupts the power supply when leakage currents are detected, protecting the user from electric shock.
Protection class IP44Allows limited use of the appliance outdoors (in places protected from direct exposure to jets of water and dust streams), as well as in a room with high humidity.
Copper motor windingProvides high efficiency, reduces the possibility of overheating, has high durability and better protection against short circuits.
Continuous dutyAppliance can be switched on for a long period of time. It works in automatic mode and does not require any action from the user.
3 planes projection modeAllows to project one horizontal plane and / or two vertical planes.
1 line + 1 plane projection modeAllows to project one horizontal plane and / or one vertical line.
AC/DC VoltageThe tool allows voltage reading in AC and DC mode
AC/DC CurrentThe tool allows ampere reading in AC and DC mode
ResistanceThe tool allows resistance measuring
CapacitanceThe tool allows capacitance reading
FrequencyThe tool allows frequency measurement
TemperatureThe tool allows temperature reading
Diode testThe tool allows diode test mode
NCV testNon contact voltage detection function
DC CurrentThe tool allows ampere reading in DC mode
Transistor testThe tool is equipped with transistor test mode
Continuity testThe tool allows circuit continuity test
Torch lightThe tool is equipped with an useful and versatile LED-light lamp
AC CurrentThe tool allows ampere reading in DC mode
Max valueAllows recording the max value, for better measuring of fluctuant data
Integrated rulerThe graduated metric scale allows to cut the tiles with precision
Angular guideThe graduated angular guide allows you to make precise angular cuts
Lighter plugThe tool is powered by a 12 V lighter plug.
Battery clampsThe included clamps allow the tool to be powered by direct connection to a 12 V power source, like the battery of your car.
Automatic ON/OFFThe pump is started by an automatic switch that detects water presence.
15L capacityThe vacuum cleaner container provides 15 liter capacity.
20L capacityThe vacuum cleaner container provides 20 liter capacity.
Safety lockSmart safety lock for avoiding accidental activation and unwanted discharge.
3-step adjustmentThe blade opening could be adjusted in 3 positions in order to optimise and speed up the work.
3 L capacityThe vacuum cleaner container provides 3 liter capacity.
The accessories not listed are not included in the sales package.The product photos on this site are for promotional purposes only.
Compatible with:CT44022 BMCCT44023 BMCCT44024 BMC
Copyright © 2019 CROWN. All Rights Reserved. CROWN is registred trademark. | CROWN adheres to Merit Link group.
Powered by nopCommerce