/2
High pressure washer CROWN is intended for washing works with a pressure water jet. The intended use of this appliance covers the cleaning of vehicles, buildings, terraces, facades and garden equipment using clean water and biodegradable chemical detergents.
x
Li-Ion batteryLight, compact, longer duration, no memory effect.
Samsung SDI battery Samsung batteries for power bank has achieved world’s longest battery life cycle. They minimize capacity loss that may occur during long-term usage and thereby maximizes the user’s convenience.
Keyless chuckEnables fast manual changing of accessories without any special key.
Variable torqueTorque regulator enables adjustment of contact pressure and torque force.
V-grooveAllows chamfering at the edges of treated workpieces.
2 function modes (drilling / impact drilling)Enables changing between 2 operation modes: drilling (in wood, metal, plastic) and impact drilling (in concrete, bricks, masonry).
2 function modes (screwdriving / drilling)Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).
3 function modes (drilling / impact drilling / chiselling)Enables changing between 3 operation modes: drilling (in wood, metal, plastic), impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
4-stage pendulumEnables the changing of pendular motion between 4 stages.
Angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Anti-vibrations systemAllows to reduce the fatigue during extended period of work.
Planing depth regulatorConstantly adjustable and suitable as additional handle for safer positioning.
Cutting depth adjustmentAllows half-cuts in order to obtain clean cuts and sharp edges during a second try.
Dust extraction systemAllows to collect dust in designated dust bag or to connect vacuum cleaner.
Electronic speed adjustmentSpeed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.
Extra gear rim chuck with SDS PLUS adapterAllows the use of drill bits with cilindric shank in rotary hammers with SDS PLUS chuck.
Gear rim chuckEnsures safe fastening of accessories.
Integrated LED lightLocated on the housing, it offers the user an always well lit workspace.
Keyless chuck with locking functionEnables fast manual changing of accessories without any special key. Equipped with locking function ensures reliable fixation of accessories.
Lock-off functionFix OFF position of on/off switch to prevent an accidental switching on of the power tool.
Lock-on functionFix ON position of on/off switch to ensure comfort during extended work mode.
M10 spindle threadSuitable for accessories featuring M10 mounting bore.
M14 spindle threadSuitable for accessories featuring M14 mounting bore.
Metal keyless chuckEnables fast manual changing of accessories without special key.
Reverse functionRotational direction switch allows to change rotational direction.
Quick chargerAllows full battery charging in only 1 hour time.
Safety clutchProtects the power tool against overload and damage in case of accessories sticking during drilling.
Safety stop Avoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.
SDS-Plus chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Soft gripLocated on the handle, it offers additional comfort for the users.
Soft startProvides a slow and even start-up without overloading the power grid.
Spindle automatic lockingDrill spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.
Spindle lockBlocks the spindle in its rotating movement so that the circular saw blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the accessories may be inserted or removed easily.
Step speed selectionAllows to select the range of revolutions per minute for specific types of work.
Vario-lock modeAllows to arrange the chisel in a comfortable position for specific chiseling works.
Variable speedAllows to select optimal speed for specific materials.
Two-position on / off switchSecured both in "on" position and in "off" position.
Restart protectionPrevents the power tool from automatically starting up after a power cut.
Saw blade easy changeEnables fast manual changing of saw blade without any special key.
Resharpenable bladesUse the specific device provided in order to resharpen blades when blunted.
Interchangeable bladesBlades sharpened on both sides; this design does not allow re-sharpening.
Impact drilling functionFor impact drilling in hard materials ( such as concrete, bricks, masonry).
Screwdriving modeFor screwing / unscrewing threaded fasteners (such as bolts, nuts, screws, self-tapping screws).
1/2" square tool holderSuitable for accessories provided with appropriate mounting hole (1/2" square). Enables quick accessories changes.
1/4" hexagonal tool holderSuitable for accessories provided with appropriate shank (1/4" hexagonal). Enables quick accessories changes.
2 function modes (blower / vacuum cleaner)Allows to convert the blower into a vacuum cleaner in order to collect debris.
2 function modes (impact drilling / chiselling)Enables changing between 2 operation modes: impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
2-step regulatorAllows to change the settings of work-temperature and air flow.
2 function modes (stirring / drilling)Enables changing between 2 operation modes: stirring (miхing different building materials) or drilling (in wood, metal, plastic).
3-step regulatorAllows to change the settings of work-temperature and air flow.
3 function modes (screwdriving / drilling / impact drilling)Enables changing between 3 operation modes: screwdriving (screwing / unscrewing threaded fasteners), drilling (in wood, metal, plastic) or impact drilling (in concrete, bricks, masonry).
3 V-grooves Allows chamfering at the edges of treated workpieces.
30L capacityThe vacuum cleaner container provides 30 liter capacity.
60L capacityThe vacuum cleaner container provides 60 liter capacity.
80L capacityThe vacuum cleaner container provides 80 liter capacity.
100L capacityThe vacuum cleaner container provides 100 liter capacity.
Adjustable nozzleAllows to choose between 3 different spray jet shapes.
Adjustable spark protectorProtects user from sparks and metal filings during the grinding process. It may be adjusted to the most suitable angle for work.
Adjustable work piece supportAllows safe placement of workpiece on the grinding disc, that permits to maintain the desired sharpening angle.
Air flow adjustmentAllows to adjust optimal air flow for specific works.
Anti-vibrations handleAllows to reduce the fatigue during extended period of work.
Automatic circuit breaker Prevents unintentional switching on in case of current supply interruption. It increases safety of the operation.
Both-sided table extensionsAllows to cut bigger workpieces.
Carriage positionAllows to lower and lock the carrying grip for easy transportation and space-saving storage.
Clamping deviceAllows to secure the workpiece during operation.
Sanding paper clamping systemFeatures clamp lever for easy and convenient replacement of sanding papers.
c-electro
Rotation speed stabilization systemMaintains the preset revolutions per minute both at an idle speed and under load. This allows a smooth advance of the power tool during operation.
Cool stageCold air mode allows to cool off workpieces and surfaces after heat treatment.
Rear D-handleAllows safe handling.
DC motorMechanically commutated electric motor powered by direct current.
Wet / dry cuttingAllows dry cutting and wet cutting thanks to the integrated water cooling system.
d-w-oper
Wet/dry functionAllows water absorption, oil absorption, acid suction and dust absorption.
Dry cuttingCutting without water cooling system.
d-oper
Dust blowing from the cutting lineAllows to re-direct the sawdust air flow.
e-s-adj
Full blade safety guardSecures cutting disc from along diameter.
Hanging systemAllows to hang power tool during the utilization.
HEX-17 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-28 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-30 tool holderSuitable for accessories provided with corresponding shank which allows fast manual fastening.
Impact rate regulationMakes it possible to set up optimal quantity of impact for the respective materials.
Impact strength regulationAllows to select optimal strength of impact for specific materials.
Kerf laser indicatorShows the cutting line.
LED-screenShows the selected number of revolutions.
LED-screenShows the selected temperature.
l-of-on
M10 tool holder threadSuitable for accessories featuring M10 shank.
M14 tool holder threadSuitable for accessories featuring M14 shank.
M22 spindle threadSuitable for accessories featuring M22 mounting bore.
M22 tool holder threadSuitable for accessories featuring M22 shank.
Choosing the chips ejection directionAllows to install reflector for chips ejection in two opposite directions.
Plunge depth control systemAllows the user to select the desired milling depth.
Mitre angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Ni-Cd batteryProvides good performance at low temperatures.
Overload protectionAutomatically switches off the power tool in case of overheating.
Power light indicatorOn when the power tool is connected to the mains and ready to be switched on.
Rotating rear handleRear handle can be rotated into different positions.
Rotation stabilizerMaintains set rotation rate irrespective of applying pressure on the surface during polishing.
r-t-holder
scale
SDS-Max chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
Sliding working tableIntended to supply workpieces when performing cross and angular cutting.
Spindle lockBlocks the spindle in its rotating movement so that the grinding accessories may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the diamond cutting blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the router bits may be inserted or removed easily.
Stroke rate regulationAllows to adjust optimal stroke rate for specific materials.
Speed adjustmentAllows to change revolutions per minute.
Table for stationary useAllows the use of power tool in stationary mode.
Temperature protectionAutomatically switches off the power tool in case of overheating.
Temperature settingAllows to adjust optimal temperature for specific types of work.
Variable paint flowAllows to set the intensity of the paint application ensuring perfect coverage.
Variable speedAllows to select optimal belt speed for specific types of work.
Velcro and clamping fixing systemAllows the use of abrasives with both type of fixing system: clamping or velcro.
Velcro fixing systemAllows quick, easy and safe fixation of abrasives.
Water resistant on/off switchSwitch is protected against water splashing.
Wet cuttingAllowed thanks to the integrated water cooling system.
Wet grindingAllows thanks to the integrated water cooling system.
Wet operationAllowed thanks to the integrated water cooling system.
Carbon brush replacement indicator lightWarns regarding the need to replace carbon brushes.
0-5-l
0-6-l
1-1-l
3/8" square tool holderSuitable for accessories provided with appropriate mounting hole (3/8" square). Enables quick accessories changes.
3/4" square tool holderSuitable for accessories provided with appropriate mounting hole (3/4" square). Enables quick accessories changes.
1" square tool holderSuitable for accessories provided with appropriate mounting hole (1" square). Enables quick accessories changes.
2 lines projection modeAllows to project one horizontal line and / or one vertical line.
3 lines projection modeAllows to project one horizontal line and / or two vertical lines.
5 lines projection modeAllows to project one horizontal line and / or four vertical lines.
Laser class 2
Automatic self-levelling
High class OSRAM Diode
Belt clipThe tool is provided with hook for easy carrying.
LCD displayDisplays the object and values of measurements made.
Reference pointAllows choosing the reference point.
Possibility of steady-state useThe power tool design allows steady-state operation.
Type of measureAllows choosing the type of measurements.
CalculatingAllows carrying out mathematical operations awith measured values.
Units selectionAllows choosing units of measurement
MemoryAllows saving measurements made.
Battery locking systemLocking bracket provides secure attachment battery, and prevents it disconnection even by work with strong vibrations.
Brushless motorBrushless motor without carbon brush for smooth and efficient work and maintenance-free.
Built-in levelDesigned for correct positioning of the appliance.
LCD screenDisplays values of measurements made.
BacklightAllows enabling the backlight.
Zoomx6 zoom
Operation modeAllows choosing the mode of operation
Arc forceThe arc force function allows the sticking of the electrode to a piece to be welded to be prevented.
Easy startThe easy start function (increased voltage of idle running) facilitates the lighting up of the welding arc.
Voltage reduction device VRDThe function of voltage reduction of idle running increases the safety of the welding works performance.
Input power Allow use one or three phase input power.
tig/mma
tig
24-4t
induct-contr
v-meter
volt-contr
ex-wire
cut
Welding current meter Shows the selected welding current.
int-wire
d-slope
h-f-arc
mosfet
mig-mma
Air cooling
Hot start function The hot start function increases the set welding current for a short time at the moment of the welding arc lighting. It facilitates the lighting up of the welding arc.
Current controlAllows the intensity of the current to be changed, depending on the thickness of the metal being cut.
3-phase
1-PhaseSingle phase input power.
IGBT technologyInsulated-gate bipolar transistor.
MMA welding technology Shielded metal arc welding / Manual metal arc welding.
Pressure protectionThe system prevent the pressure overload.
Detergent tank
Hose reel Allows you to safely and compactly store a high-pressure hose.
Adjusting detergent quantityAllows setting the quantity of detergent added to the water.
Self primingThe automatic system allows to start the tool quickly even after long inactivity.
Variable pressureAllows to select optimal pressure for specific uses.
Adjustable streamEnables fast manual adjustment of water stream.
Easy fill Allows filling the reservoir without dismount it.
Safety cleaningPrevent electric shock when cleaning the power tools.
Built-in stationAllows you to safely store, transport the sprayer.
Metal tankMade of robust stainless steel, reliable and easy to clean.
Suction power 2-step adjustment
Suction power 3-step adjustment
Triple outlet air cleaning systemThe system allows for effective removal of fine dust (plaster, soot, etc.).
Air blowing modeThis function allows for cleaning by blowing off waste with airflow in places where it is complicated or impossible to suck in waste (air purging of complex office machines, blowing leaves off gravel path, etc.).
Suction power adjustmentThis function may be useful when cleaning dirt from light movable objects (carpets, floor mats, etc.).
Possibility to connect other power toolsWhen in this mode, the vacuum cleaner switches on automatically if the connected power tool is switched on.
HEPA-filter cleaningAllows clean the HEPA filter without removing it from the vacuum cleaner.
Precise rotationAllows accurately set the position of the tool's body when measuring.
Protection class IP54 Protection against splashes falling in any direction.
Magnification x32Allows magnify the image of the object.
Manometer The tool is provided with manometer for a precise regulation of the pressure.
Quick-change attachmentsEnlarge the area of power tool usage and allow to perform works in hard-to-reach places.
Spindle automatic locking Tool spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.
Outdoor modeAllows to make measurements in conditions of strong illumination.
Unlevelled signalIt signals the impossibility of automatic alignment of the laser head.
Laser head lockingAllows to lock the laser head in a stationary position.
Integrated tripodThe tripod is included in the delivery set.
Precise rotationAllows you to position the vertical beam with high accuracy.
al-frame
s-b-lock
rebat
l-sensor
spirit
ergonom
gas
Quick couplingAir inlet 1/4".
Quick couplingAir inlet 1/2".
Quick couplingAir inlet 3/8".
3-sizes
al-cu
a-suct
hang
360-rot
e-detach
2in1
d-exhaust
Units selectionAllows choosing units of measurement.
square-b
univ-w
oil-wat